CGYWM - E 312, C428
- MSDS: CGYWM
- Manufacturer: BENJAMIN MOORE AND CO
- Product Name: E 312, C428
- National Stock Number: 8010-00N079058
Product Identification
Product ID:E 312, C428
MSDS Date:06/12/1991
FSC:8010
NIIN:00N079058
MSDS Number: CGYWM
Responsible Party
MONTVALE, NJ 07645
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 201-573-9600
Cage: 09585
Contractor
Telephone: 201-573-9600
Cage: 91950
Ingredients
2 @ 20C.
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 55.1%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
SILICA GEL; (SILICA, AMORPHOUS)
CAS: 112945-52-5
RTECS: VV7310000
Fraction By Weight: 10%
OSHA PEL 6 MG/M3
ACGIH TLV: 10 MG/M3
BENTONITE CLAY
CAS: 121888-66-2
Fraction By Weight: 1.6%
OSHA PEL N/K
ACGIH TLV: 0.1 MG/M3 (MFR)
SILICA, AMORPHOUS (FUMED); (SILICON DIOXIDE)
CAS: 112945-52-5
RTECS: VV7310000
Fraction By Weight: 14.3%
OSHA PEL 6 MG/M3
ACGIH TLV: 10 MG/M3
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHALATION:CAUSES NOSE AND
THROAT IRRITATION. CONTACT:CAUSES EYE AND SKIN IRRITATION.
INGESTION:IRRITATION OF DIGESTIVE TRACT AND NERVOUS SYSTEM
DEPRESSION (DROWSINESS). CHRONIC:SKIN CONT:PROLON GED OR REPEATED
EXPOSURE MAY CAUSE DERMATITIS. NOTICE:REPORTS HAVE ASSOCIATED
PERMANENT BRAIN AND (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:NERVOUS SYSTEM DAMAGE WITH REPEATED,
PROLONGED OVEREXPOSURE TO SOLVENTS AMONG PERSONS ENGAGED IN THE
PAINTING TRADE. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING
AND INHALING THE CONTENTS MAY BE HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:NONE EXPECTED WHEN USED I/A/W SAFE
HANDLING & USE INFORMATION.
First Aid
First Aid:INHAL:REMOVE FROM HAZARAD AREA. MAINTAIN BREATHING. CALL MD.
SKIN:REMOVE W/SOAP & WATER. EYES:FLUSH IMMEDIATELY W/LARGE AMOUNTS
OF WATER FOR AT LEAST 15 MINUTES. CALL MD. INGEST:DRINK 1-2 GLASSES
OF W ATER TO DILUTE. DO NOT INDUCE VOMITING.CALL MD.
Fire Fighting
Flash Point Method:CC
Flash Point:>100F,>38C
Lower Limits:1%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . DO NOT USE WATER STREAM ON BURNING LIQUID. COOL EXPOSED
CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard:FLAMMABLE. COMBUSTIBLE. CLOSED CONTAINERS
MAY BURST IF EXPOSED TO EXTREME HEAT OR FIRE. TOXIC GASES MAY FORM
WHEN PRODUCT BURNS.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS. USE NON-SPARKING TOOLS TO RETURN MATERIALS TO
CONTAINER. ABSORB RESIDUE WITH FULLER'S EARTH.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:COMBUSTIBLE - KEEP AWAY FROM HEAT &
FLAME.
Other Precautions:USE ONLY W/ADEQUATE VENTILATION. AVOID PROLONGED
CONTACT W/SKIN & BREATHING OF VAPOR, SPRAY MIST OR SANDING DUST.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED RESPIRATOR SPECIFIED FOR
PROTECTION AGAINST PAINT SPRAY MIST, SANDING DUST & ORGANIC VAPORS
IN RESTRICTED OR CONFINED AREAS.
Ventilation:ADEQ TO MAINTAIN WORKING ATM BELOW TLV & LEL. MECH EXHST
MAY BE REQD IN CONFINED AREAS. DISCHARGE EXHST ONLY IN (SUPDAT)
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . CLOTHING ADEQUATE TO PROTECT SKIN.
Work Hygienic Practices:REMOVE & WASH CLOTHING BEFORE REUSE. WASH HANDS
BEFORE EATING, SMOKING OR USING THE WASHROOM.
Supplemental Safety and Health
% VOLAT:44.6-64.1. VENT:AREA AWAY FROM IGNITION SOURCES.
Chemical Properties
Boiling Pt:B.P. Text:389F,198C
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:0.89-0.97
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:SUPDAT
Stability
Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE.
Stability Condition to Avoid:ELEVATED TEMPERATURES & BUILD UP OF
VAPORS.
Hazardous Decomposition Products:BURNING MAY PRODUCE CARBON DIOXIDE &
CARBON MONOXIDE.
Disposal
Waste Disposal Methods:CONVENTIONAL PROCEDURES IN COMPLIANCE W/LOCAL,
STATE & FEDERAL REGULATIONS. DO NOT INCINERATE SEALED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.